 |
|
|
|
| |
SMS XYZ Multi-Axis Configurations
|
|
| |
 |
L70 Series 2 Axis X-Y
The L70 series is designed with mounting holes for easy X-Y setup. The “L” shape provides a means to mount to either top or side of the carriage for up to 4 configurations of X-Y mounting.
|
|
| |
|
|
|
| |
 |
XL100 series 2-Axis X-Y
The XL100 series has mounting holes along the base of the extrusion to allow easy stacking without the need for a transition plate. Given the twin rail extended Moment loading capabilities, one axis can be fully cantilevered off of the other with <0.2mm deflection at full load at 500mm.
|
|
| |
|
|
|
| |
 |
HLD60 with L70 2 Axis System
A transition plate is available for direct mounting of an L70 series to an HLD series actuator to provide a compact secondary axis. This same setup can be in an X-Y or X-Z configuration.
|
|
| |
|
|
|
| |
 |
HLD60 Twin Rails with L70 2 Axis System
The configuration shown in the picture to the right includes 1 HLD actuator with twin external rails and 1 L70 actuator. This is a close up of the mounting plate which is available. Mounting plates are also available for mounting a XL100 to an HLD actuator. |
|
| |
|
|
|
| |
 |
L70 Series 3 Axis X-Y-Z
The configuration shown in the picture to the right includes 4 L70 ball screw actuators. No mounting brackets are needed when mounting an L70 actuator to itself. SmartMotors™ have a mode follow option which will allow a Master and Slave axis. |
|
| |
|
|
|
| |
 |
HLD60 with L70 3 Axis System
The configuration shown in the picture to the right includes 2 HLD actuators – 1 with a single external rail and 1 HLD actuator with twin external rails. Toe clamps are available for mounting the HLD actuators together. In this picture, there are 2 different sizes of toe clamps used. |
|
| |
|
|
|
| |
|
|
|
