P366 Flexslice Coupler

Trio P366 Flexslice Coupler

£ POA

The Flexslice system begins with the coupler.

The coupler is connected to the network via the upper Ethernet interface. The lower RJ45 socket may be used to connect further EtherCAT devices in the same strand.

The bus coupler supports up to 16 input/output modules which have a positive mechanical lock and bus connector, making a reliable EBUS connection through the backplane. The complete assembly can be DIN rail mounted. The coupler converts the passing telegrams from Ethernet 100BASE-T to EBUS signal format.

In the EtherCAT network, the P366 coupler can be installed in any position in the Ethernet string; making it suitable for operation close to the master or at a remote position.


Download Flexslice Brochure (PDF 8MB)

No documents online for this product.
No files online for this product.

Trio Motion


Trio design and manufacture flexible and economical solutions for motion control applications, enabling control of complex high speed automation and machine control in most industries throughout the world.


Their comprehensive range of motion controllers (Motion Coordinators) allows seamless control of 1 to 128 axes of servo motors, stepper motors, piezo motors or hydraulic systems. Our flexible, modular controller range uses a common user interface and standard programming language; TrioBASIC.


They design customised solutions for OEMs, manufacture motion control options for globally available drives and license designs and technology to a number of automation companies. Our products are available locally via our global network of distributors and drive specialists. Each offers local training and technical support.



Trio Motion supply:


  • Conventional Motion Controllers
  • EtherCAT Motion Controllers
  • RTEX Control
  • EtherCAT Motion Controllers
  • CAN I/O Interfaces
  • EtherCAT I/O Interfaces
  • Free Software and Support Applications


SMS Machine Automation and Trio Motion


We are a UK Distributor for Trio products and have successfully used their products CAN capabilities to replace obsolete ABB e100 units for a number of machine builders, allowing them to make only minor modifications to design rather than make sweeping changes updating from a motion controller to a PLC based solution.

Power supply requirement
24V DC, 0.8A min for full system
EtherCAT Connection
RJ45
Protocol
EtherCAT
Data rate
100 Mbit/s
Power Supply
24V / 1.5W
Isolation
1KV
EtherCAT refresh cycle
≥ 125us
Network Cable
CAT5e min
Mounting
DIN rail mount
Size (w x d x h) mm
17.2 x 147 x 107
Weight
160g
Connectors
Push-in wiring terminals
EMC
EN61000-6-2 (2005) Industrial Noise Immunity/ EN61000-6-4 (2007) Industrial Noise Emissions.
RoHs, CE, UL
Compliant

How to order

If you'd like to order parts or get a quotation there are a number of options to suit your preference. Whether you know the parts, numbers and options you need or if you require help in choosing the right items, our sales team are here to help.


By email - Send an email to sales (at) automation.co.uk


By telephone - 01226 771 630


Speak to us on Live Chat - Drop us a message below and we can help you choose the right parts.